View P270HVN010_7877826.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

- 1 - au optronics corporation product specification p270hvn01.0 () preliminary specification (v) final specification module 2 7.0? color tft-lcd model name p270hvn01.0 customer date approved by note: this specification is subject to change without notice. approved by d ate howard lee 2013/5/20 prepared by date rafael 2013/5/24 desktop display business group / au optronics corporation data modul ag - www.data-modul.com
- 2 - au optronics corporation product specification p270hvn01.0 contents 1 handling precautions ........................................................................................5 2 general description ...........................................................................................6 2.1 display characteristics....................................................................................................... 6 2.2 absolute maximum rating of environment ........................................................................ 7 2.3 optical characteristics ....................................................................................................... 8 2.4 mechanical characteristics ............................................................. e` e ` e` e` ! x` x` x` x` 3 tft-lcd module ..............................................................................................13 3.1 block diagram.................................................................................................................. 13 3.2 interface connection........................................................................................................ 14 3.2.1 connector type....................................................................................................... 14 3.2.2 connector pin assignment...................................................................................... 14 3.3 electrical characteristics.................................................................................................. 16 3.3.1 absolute maximum rating ...................................................................................... 16 3.3.2 recommended operating condition....................................................................... 16 3.4 signal characteristics ...................................................................................................... 17 3.4.1 lcd pixel format.................................................................................................... 17 3.4.2 lvds data format .................................................................................................. 17 3.4.3 color versus input data .......................................................................................... 18 3.4.4 lvds specification.................................................................................................. 19 3.4.5 input timing specification ....................................................................................... 21 3.4.6 input timing diagram .............................................................................................. 22 3.5 power on/off sequence ............................................................................................... 23 4 backlight unit ...................................................................................................24 4.1 block diagram.................................................................................................................. 24 4.2 interface connection........................................................................................................ 25 4.2.1 connector type....................................................................................................... 25 4.2.2 connector pin assignment...................................................................................... 27 4.3 electrical characteristics.................................................................................................. 28 4.3.1 absolute maximum rating ...................................................................................... 28 4.3.2 recommended operating condition....................................................................... 28 5 reliability test..................................................................................................30 6 shipping label .................................................................................................31 7 mechanical characteristics .............................................................................32 8 packing specification ......................................................................................35 8.1 packing flow.................................................................................................................... 35 8.2 pallet and shipment information....................................................................................... 36 data modul ag - www.data-modul.com
- 3 - au optronics corporation product specification p270hvn01.0 record of revision version date page description 0.0 2012/11/30 first release 0.1 2012/12/20 34 to modify the ch 11-2 panel dimension with 613.6(h)mm x 356.85(v) mm x 10(d)mm 18 to correct the note3 , vled changed vlb re-named the lvds signal 29 update shipping label 0.2 2012/01/29 10 remove page 10 12 18 26 old naming new 1.0 2013/05/24 all new format update 7 to define the maximum value of response time 7 color coordinates by update(0.064 0.055) 32-34 adding mylar on front bezel surface, drawing updated 28 recommendation for led driver power design: to modify the maxmium of power is 23.76(24.95 23.76) 35-36 after modifying , the packing box is 10pcs/box and the weight of pallet of packing is 229.94kg.(9pcs/box 10pcs/box; 216kg 229.94kg) data modul ag - www.data-modul.com
- 4 - au optronics corporation product specification p270hvn01.0 data modul ag - www.data-modul.com
- 5 - au optronics corporation product specification p270hvn01.0 1 handling precautions 1 ) since front polarizer is easily damaged, pay attention not to scratch it. 2) be sure to turn off power supply when inserting or disconnecting from input connector. 3) wipe off water drop immediately. long contact with water may cause discoloration or spots. 4) when the panel surface is soiled, wipe it with absorbent cotton or other soft cloth. 5) since the panel is made of glass, it may break or crack if dropped or bumped on hard surface. 6) since cmos lsi is used in this module, take care of static electricity and insure human earth when handling. 7) do not open or modify the module assembly. 8) do not press the reflector sheet at the back of the module to any directions. 9) in case a tft-lcd module has to be put back into the packing container slot after once it was taken out from the container, do not press the center of the led lightbar edge. otherwise the tft-lcd module may be damaged. 10) insert or pull out the interface connector, be sure not to rotate nor tilt it of the tft-lcd module. 11) do not twist nor bend the tft -lcd module even momentary. it should be taken into consideration that no bending/twisting forces are applied to the tft-lcd module from outside. otherwise the tft-lcd module may be damaged. 12) please avoid touching cof position while you are doing mechanical design. 13) when storing modules as spares for a long time, the following precaution is necessary: store them in a dark place. do not expose the module to sunlight or fluorescent light. keep the temperature between 5 and 35 at normal humidity. data modul ag - www.data-modul.com
- - 6 au optronics corporation product specification p270hvn01.0 2 general description this specification applies to the 27 inch-fhd color a-si tft-lcd module p270hvn01.0. the display supports the f hd - 1920(h) x 1080(v) screen format and 16.7m colors (rgb 8-bit data). the light source of this tft-lcd module is w-led. the input interface is dual channel lvds and this module doesn?t contain an driver board for backlight . 2 .1 display characteristics the following items are characteristics summary on the table under 25 condition: items unit specifications screen diagonal [mm] 685.65(27.0?) active area [mm] 597.6 (h) x 336.15 (v) pixels h x v - 1920(x3) x 1080 pixel pitch [um] 311.25 (per one triad) 311.25 pixel arrangement - r.g.b. vertical island display mode - va mode, normally black white luminance ( center ) [cd/m 2 ] 3 50 cd/m 2 (typ.) @ 110ma 3 00 cd/m 2 (typ.) @ 100ma contrast ratio - 3000 (typ.) response time [msec] 12ms (typ., on/off) power consumption (lcd module + backligh unit) [watt] 26.88 watt vdd line : pdd (typ), all white pattern at 60hz = 5.1 w led line : pblu (typ) = 21.78 w(@110ma) weight [grams] 2180 gram (typ.) outline dimension [mm] 613.6(h)x356.85(v)x10.0(d) (typ.) electrical interface - dual channel lvds support color - 16.7m colors (rgb 8-bit) surface treatment - anti-glare 3h temperature range operating storage (shipping) [ o c] [ o c] 0 to +50 -20 to +60 rohs compliance - rohs compliance tco compliance - tco 6.0 compliance data modul ag - www.data-modul.com
- - 7 au optronics corporation product specification p270hvn01.0 2.2 absolute maximum rating of environment p ermanent damage may occur if exceeding the following maximum rating. note 2-1: temperature and relative humidity range are shown as the below figure. 1. 90% rh max ( ta Q 39 ) 2. max wet-bulb temperature at 39 or less. ( ta Q 39 ) 3. no condensation operating range storage range symbol description min. max. unit remark top operating temperature 0 +50 [ o c] n ote 2-1 tgs glass surface temperature (operation) 0 +65 [ o c] n ote 2-1 function judged only hop operation humidity 5 90 [%rh] tst storage temperature -20 +60 [ o c] hst storage humidity 5 90 [%rh] note 2-1 data modul ag - www.data-modul.com
- - 8 au optronics corporation product specification p270hvn01.0 2.3 optical characteristics the optical characteristics are measured on the following test condition. test condition: 1. equipment setup: please refer to note 2-2 . 2. panel lighting time: 30 minutes 3. vdd=5.0v, fv=60hz,is=110ma (typ.),ta=25 symbol description min. typ. max. unit remark white luminance (center of screen)@110ma 280 350 - [cd/m2] note 2-2 by sr-3 l w white luminance (center of screen)@100ma 240 300 l uni luminance uniformity (9 points) 75 80 - [%] note 2-3 by sr-3 cr contrast ratio (center of screen) 1800 3000 - - note 2-4 by sr-3 r right 150 178 - l horizontal viewing angle (cr=10) left 150 178 - h up 150 178 - l vertical viewing angle (cr=10) down 150 178 - r right 150 178 - l horizontal viewing angle (cr=5) left 150 178 - h up 150 178 - l vertical viewing angle (cr=5) down 150 178 - [degree] note 2-5 by sr-3 t r rising time - 7 17 t f falling time - 5 7 - response time rising + falling - 12 24 [msec] note 2-6 by trd-100 r x red x 0.615 0.645 0.675 r y red y 0.300 0.330 0.360 g x green x 0.285 0.315 0.345 g y green y 0.590 0.620 0.650 b x blue x 0.124 0.154 0.184 b y blue y 0.025 0.055 0.085 w x white x 0.283 0.313 0.343 w y color coordinates (cie 1931) white y 0.299 0.329 0.359 - by sr-3 ct crosstalk - - 1.5 [%] note 2-7 by sr-3 data modul ag - www.data-modul.com
- - 9 au optronics corporation product specification p270hvn01.0 f db flicker (center of screen) - - -20 [db] note 2-8 by sr-3 note 2-2: equipment setup : note 2-3: luminance uniformity measurement definition: p9)~(p1 points 9 of luminance maximum p9)~(p1 points 9 of luminance minimum y uniformit luminance = a .test pattern: white pattern center of the screen tft - lcd module measured distance (50cm) photo detector (sr-3, trd-100) lcd panel data modul ag - www.data-modul.com
- - 10 au optronics corporation product specification p270hvn01.0 note 2-4: contrast ratio measurement definition: pattern black of luminance pattern whiteof luminance ratio contrast = a. measured position: center of screen (p5) & perpendicular to the screen ( = =0) note 2-5: viewing angle measurement definition: the angle at which the contrast ratio is greater than 10 & 5. a. horizontal view angle: divide to left & right ( l & r ) v ertical view angle: divide to up & down ( h & l ) n ote 2-6: response time measurement data modul ag - www.data-modul.com
- - 11 au optronics corporation product specification p270hvn01.0 the output signals of photo detector are measured when the input signals are changed from ?black? to ?white? (rising time, t r ), and from ?white? to ?black? (falling time, t f ), respectively. the response time is i nterval between the 10% and 90% of optical response. ( black & white color definition: please refer section 3.4.3) 100 90 10 0 % optical response w hite t f 100 10 0 % optical response white b lack black 1 frame 1 frame t r data modul ag - www.data-modul.com
- - 12 au optronics corporation product specification p270hvn01.0 note 2-7: crosstalk measurement definition: ct = max. (ct h ,ct v ); w here a.maximum horizontal crosstalk : ct h = max. (| y bl ? y al | / y al 100 %, | y br ? y ar | / y ar 100 %); m aximum vertical crosstalk: ct v = max. (| y bu ? y au | / y au 100 %, | y bd ? y ad | / y ad 100 %); b . y au , y ad , y al , y ar = luminance of measured location without black pattern y bu , y bd , y bl , y br = luminance of measured location with black pattern note 2-8: flicker measurement a. test pattern: it is listed as following. r: red, g: green, b:blue b. measured position: center of screen (p5) & perpendicular to the screen ( = =0) gray level = l0 gray level = l127 data modul ag - www.data-modul.com
- - 13 au optronics corporation product specification p270hvn01.0 3 tft-lcd module 3.1 block diagram the following shows the block diagram of the27.0 inch color tft-lcd module. vdd auo asic connector dc/dc c onverter gamma correction lvds r eceiver timing controller mini lvds transmitter asic lvds signal signal g 1080 g1 d 5760 d1 control board tft-lcd 1 920(x3) x 1080 pi xels x - driver ic y - driver ic data modul ag - www.data-modul.com
- - 14 au optronics corporation product specification p270hvn01.0 3.2 interface connection 3.2.1 connector type m anufacturer p-two stm tft-lcd connector part number al230f-a0g1d-p msckt2407p30hb manufacturer jae mating connector part number fi-x30hl (locked type) 3.2.2 connector pin assignment pin # symbol description remark 1 rxo0 - negative lvds differential data input (odd data) 2 rxo0+ positive lvds differential data input (odd data) 3 rxo1 - negative lvds differential data input (odd data) 4 rxo1+ positive lvds differential data input (odd data) 5 rxo2 - ne gative lvds differential data input (odd data) 6 rxo2+ positive lvds differential data input (odd data) 7 gnd ground 8 rxoclk - negative lvds differential clock input (odd clock) 9 rxoclk+ positive lvds differential clock input (odd clock) 10 rxo3 - negative lvds differential data input (odd data) 11 rxo3+ positive lvds differential data input (odd data) 12 rxe0 - negative lvds differential data input (even data) 13 rxe0+ positive lvds differential data input (even data) 14 gnd ground 15 rx e1 - negative lvds differential data input (even data) 16 rxe1+ positive lvds differential data input (even data) 17 gnd ground 18 rxe2 - negative lvds differential data input (even data) 19 rxe2+ positive lvds differential data input (even data) 2 0 rxeclk - negative lvds differential clock input (even clock) 21 rxeclk+ positive lvds differential clock input (even clock) 22 rxe3 - negative lvds differential data input (even data) 23 rxe3+ positive lvds differential data input (even data) 24 gn d ground 25 nc no connection (for auo test only. do not connect) 26 nc no connection (for auo test only. do not connect) data modul ag - www.data-modul.com
- - 15 au optronics corporation product specification p270hvn01.0 27 nc no connection (for auo test only. do not connect) 28 vdd power supply input voltage 29 vdd power supply input voltage 30 vdd power supply input voltage lvds c/n pin 1 l/b c/n pin 1 data modul ag - www.data-modul.com
- - 16 au optronics corporation product specification p270hvn01.0 3.3 electrical characteristics 3.3.1 absolute maximum rating p ermanent damage may occur if exceeding the following maximum rating. 3.3.2 recommended operating condition note 3-1: inrush current measurement: t est circuit: the duration of vdd rising time: 470us . s ymbol description min max unit remark vdd power supply input voltage gnd-0.3 6.0 [volt] ta=25 symbol description min typ max unit remark vdd power supply input voltage 4.5 5.0 5.5 [volt] - 1.02 1.22 [a] vdd= 5.0v, black pattern, fv=60hz idd power supply input current (rms) 1.21 1.45 [a] vdd= 5.0v, black pattern, fv=75hz - 5.1 6.12 [watt] vdd= 5.0v, black pattern, fv=60hz pdd vdd power consumption 6.05 7.26 [watt] vdd= 5.0v, black pattern, fv=75hz irush inrush current - - 3.0 [a] note 3-1 vddrp allowable vdd ripple voltage - - 500 [mv] vdd= 5.0v, black pattern, fv=75hz data modul ag - www.data-modul.com
- - 17 au optronics corporation product specification p270hvn01.0 3.4 signal characteristics 3.4.1 lcd pixel format r g b r g b r g b r g b r g b r g b r g b r g b 1 2 1 919 1 920 1st line 1080 line 3.4.2 lvds data format note 3-2: a. o = ?odd pixel data? e = ?even pixel data? b. refer to 3.4.1 lcd pixel format, the 1st data is 1 (odd pixel data), the 2 nd data is 2 (even pixel data) and t he last data is 1920 (even pixel data). data modul ag - www.data-modul.com
- - 18 au optronics corporation product specification p270hvn01.0 3.4.3 color versus input data the following table is for color versus input data (8bit). the higher the gray level, the brighter the color. data modul ag - www.data-modul.com
- - 19 au optronics corporation product specification p270hvn01.0 3.4.4 lvds specification a. dc characteristics: symbol description min typ max units condition v th l vds differential input high threshold - - +100 [mv] v cm = 1.2v v tl l vds differential input low threshold -100 - - [mv] v cm = 1.2v v id l vds differential input voltage 100 - 600 [mv] v cm l vds common mode voltage +1.0 +1.2 +1.5 [v] v th -v tl = 200mv lvds signal waveform: use rxoclk- & rxoclk+ as example. rxoclk- rxoclk+ data modul ag - www.data-modul.com
- - 20 au optronics corporation product specification p270hvn01.0 b. ac characteristics: s ymbol description min max unit remark f dev m aximum deviation of input clock frequency during spread spectrum - 3 % f mod m aximum modulation frequency of input clock during spread spectrum - 200 khz f clk: lvds clock frequency 1 f mod freq f max f c lk f min f c lk * f dev < spread spectrum> t ime data modul ag - www.data-modul.com
- - 21 au optronics corporation product specification p270hvn01.0 3.4.5 input timing specification it only support de mode, and the input timing are shown as the following table. symbol description min. typ. max. unit remark tv period 1092 1130 1793 th tdisp (v) active 1080 1080 1080 th tblk (v) blanking 12 50 713 th fv vertical section frequency 50 60 76 hz th period 1004 1050 1100 tclk tdisp (h) active 960 960 960 tclk tblk (h) blanking 44 90 140 tclk fh horizontal section frequency 55 68 90 khz note 3-3 tclk period 11.1 14.0 18.2 ns 1/fclk fclk lvds clock frequency 54.8 71.2 90.0 mhz note 3-4 note 3-3: the equation is listed as following. please don?t exceed the above recommended value. fh (min.) = fclk (min.) / th (min.); fh (typ.) = fclk (typ.) / th (typ.); fh (max.)= fclk (max.) / th (min.); note 3-4: the equation is listed as following. please don?t exceed the above recommended value. fclk (min.) = fv (min.) x th (min.) x tv (min.); fclk (typ.) = fv (typ.) x th (typ.) x tv (typ.); fclk (max.) = fv (max.) x th (typ.) x tv (typ.); data modul ag - www.data-modul.com
- - 22 au optronics corporation product specification p270hvn01.0 3.4.6 input timing diagram line line pixel 7 invalid data pixel pixel m-3 2 tdisp(h) pixel 1 pixel pixel invalid data 6 m-2 m-1 rgb data x pixel de pixel pixel clk n 3 line line 32 tdisp(v) pixel rgb data (odd) rgb data (even) line 8 m pixel m pixel m-4 invalid data th tv pixel n tclk pixel m-5 invalid data 4 pixel 5 invalid data 12 pixel invalid data 1 de 4 pixel 119 line n line tblk(h) 10 pixel pixel y tblk(v) m-1 pixel pixel m pixel m-3 m-2 pixel pixel pixel 1 4 pixel 3 pixel 2 m-4 pixel pixel m-5 m-6 pixel m-7 pixel th data modul ag - www.data-modul.com
- - 23 au optronics corporation product specification p270hvn01.0 3.5 power on/off sequence vdd power,lvds signal and backlight on/off sequence are as following. lvds signals from any system shall be hi-z state when vdd is off. power sequence timing value remark symbol min. typ. max. unit t1 0.5 - 10 [ms] t2 0 - 50 [ms] t3 500 - - [ms] t4 100 - - [ms] t5 0 50 [ms] note 3-5 note 3-6 t6 5 - 100 [ms] note 3-6 t7 1000 - - [ms] note 3-5 : recommend setting t5 = 0ms to avoid electronic noise when vdd is off. note 3-6 : during t5 and t6 period , please keep the level of input lvds signals with hi-z state. t7 t5 t2 t3 valid data 10% 90% 10% 90% t4 t6 vdd lvds signal v sled backlight on backlight off backlight off t1 backlight off data modul ag - www.data-modul.com
- - 24 au optronics corporation product specification p270hvn01.0 4 backlight unit 4.1 block diagram the following shows the block diagram of the 27.0 inch backlight unit. and it includes 60pcs led in the led light bar. ( 4 strings and 15 pcs led of one string). v sled + - v s i s i s i s i s ch1 ch2 ch3 ch4 connector data modul ag - www.data-modul.com
- - 25 au optronics corporation product specification p270hvn01.0 4.2 interface connection 4.2.1 connector type m anufacturer entery backlight connector part number 3707k-s06n-21r manufacturer entery mating connector part number h112k-p06n-13b (locking type) backlight connector dimension: )(0.1,25.400.39.13 mmunit pitch dvh = = = data modul ag - www.data-modul.com
- - 26 au optronics corporation product specification p270hvn01.0 mating connector dimension: data modul ag - www.data-modul.com
- - 27 au optronics corporation product specification p270hvn01.0 4.2.2 connector pin assignment pin# symbol description remark 1 ch1 led current feedback terminal (channel 1) 2 ch2 led current feedback terminal (channel 2) 3 v sled l ed power supply voltage input terminal 4 v sled l ed power supply voltage input terminal 5 ch3 led current feedback terminal (channel 3) 6 ch4 led current feedback terminal (channel 4) data modul ag - www.data-modul.com
- - 28 au optronics corporation product specification p270hvn01.0 4.3 electrical characteristics 4.3.1 absolute maximum rating p ermanent damage may occur if exceeding the following maximum rating. (ta=25 ) symbol description min max unit remark 150 [ma] 100% duty ratio is led string current 0 210 [ma] duty ratio Q 10% pulse time=10 ms duty ratio= (a / b) x 100% ; (a: pulse time, b: period) 4.3.2 recommended operating condition (ta=25 ) symbol description min. typ. max. unit remark is led string current - 110 115.5 [ma] 100% duty ratio of led chip vs led string voltage 44.25 49.5 54 [volt] is=60ma @ 100% duty ratio; note 4-1 note 4-5 ? vs maximum vs voltage deviation of light bar - - 3 [volt] is=60ma @ 100% duty ratio; note 4-2 p blu l ed light bar power consumption - 21.78 23.76 [watt] note 4-3 lt led led life time 3 0,000 - - [hour] note 4-4 data modul ag - www.data-modul.com
- - 29 au optronics corporation product specification p270hvn01.0 note 4-1: vs (typ.) = v f (typ.) x led no. (one string); a. v f : led chip forward voltage, v f (min.)=2.8v, v f (typ.)=3.2v, v f (max.)=3.4v b . the same euqation to calculate vs(min.) & vs (max.) for respective v f (min.) & v f (max.); note 4-2: ? vs (max.) = ? v f x led no. (one string); a. ? v f: led chip forward voltage deviation; (0.2 v , each bin of led v f ) n ote 4-3: p blu (typ.) = vs (typ.) x is (typ.) x 4 ; ( 4 is total string no. of led light bar) p blu (max.) = vs (max.) x is (ttp.) x 4 ; note 4-4: definition of life time: a. brightness of led becomes to 50% of its original value b. test condition: is = 110ma and 25 (room temperature) note 4-5: recommendation for led driver power design: due to there are electrical property deviation in led & monitor set system component after long time operation. auo strongly recommend the design value of led driver board ovp (over voltage protection) should be 10% higher than max. value of led string voltage (vs) at least. data modul ag - www.data-modul.com
- - 30 au optronics corporation product specification p270hvn01.0 5 reliability test auo reliability test items are listed as following table. ( b are panel only ) items condition remark temperature humidity bias (thb) ta= 50 , 80%rh, 300hours high temperature operation (hto) ta= 50 , 50%rh, 300hours low temperature operation (lto) ta= 0 , 300hours high temperature storage (hts) ta= 60 , 300hours low temperature storage (lts) ta= -20 , 300hours vibration test (non-operation) acceleration: 1.5 grms wave: random frequency: 10 - 200 hz sweep: 30 minutes each axis (x, y, z) shock test (non-operation) acceleration: 50 g wave: half-sine active time: 20 ms direction: x, y, z (one time for each axis) drop test height: 60 cm, package test thermal shock test (tst) -20 /30min, 60 /30min, 100 cycles note 5-1 on/off test on/10sec, off/10sec, 30,000 cycles contact discharge: 15kv, 150pf(330 ) 1sec, 8 points, 25 times/ point. esd (electro static discharge) air discharge: 15kv, 150pf(330 ) 1sec 8 points, 25 times/ point. note 5-2 altitude test operation:18,000 ft non-operation:40,000 ft note 5-1 : a. a cycle of rapid temperature change consists of varying the temperature from -20 to 60 , and back again. power is not applied during the test. b. after finish temperature cycling, the unit is placed in normal room ambient for at least 4 hours before power on. note 5-2 : en61000-4-2, esd class b: certain performance degradation allowed no data lost self-recoverable no hardware failures. data modul ag - www.data-modul.com
- - 31 au optronics corporation product specification p270hvn01.0 6 shipping label t he label is on the panel as shown below: note 6-1: for pb free products, auo will add for identification. note 6-2: for rohs compatible products, auo will add for identification. note 6-3: for china rohs compatible products, auo will add for identification. note 6-4: the green mark will be presented only when the green documents have been ready by auo internal green team. manufactured xx/xx model no: p270hvn01.0 au optronics data modul ag - www.data-modul.com
32 7 mechanical characteristics data modul ag - www.data-modul.com
33 data modul ag - www.data-modul.com
34 avoid touching cof position when doing mechanical design data modul ag - www.data-modul.com
35 8 packing specification 8.1 packing flow module paste protect film 1 p cs module/esd open top cover paper cushion paper carton h " tape put top cover 10pcs/carton stretch film label corner angle pet band moisture-proof film corner angle pallet data modul ag - www.data-modul.com
36 8.2 pallet and shipment information specification item q'ty dimension weight(kg) remark panel 1 613.6(h)mm x 356.85(v)mm x 10(d)mm 2.180 cushion 1 - 4.41 box 1 708(l)mm x 261(w)mm x 473(h)mm 1.38 without panel & cushion packing box 10 pcs/box 708(l)mm x 261(w)mm x 473(h)mm 27.13 with panel & cushion pallet 1 1070(l)mm x 740(w)mm x 138(h)mm 12.9 pallet after packing 8 boxes/pallet 1070(l)mm x 740(w)mm x 138(h)mm 229.94 data modul ag - www.data-modul.com
2 di splay s and embedded solutions data mo d ul a g | l andsberger str. 322 | 80687 munich | t el . +49-89-56017-0 | fax +49-89-56017-119 | www.data-modul.com d a ta m o d ul headquarters munich landsberger str. 322 d-80687 munich - germany phone: +49-89-56017-0 fax: +49-89-56017-119 www.data-modul.com sales o ffic e hamburg borsteler chaussee 51 d-22453 hamburg - germany phone: +49-40-42947377-0 sales o ffic e duesseldorf fritz-vomfelde-str. 8 d-40547 duesseldorf - germany phone: +49-211-52709-0 sales o ffic e scandinavia lundsmindevej 5 dk-6000 kolding - denmark phone: +45-75-224477 d a ta m o d ul franc e 7 rue saint christophe f-60300 baron - f ranc e phone: +33-3-44549699 d a ta m o d ul italy, s.r.l. regus center senigallia via senigallia 18/2 i-20161 milano - italy phone: +39-02-64672509 d a ta m o d ul iberia, s. l . c/ ado lfo prez e s quivel 3 e dific io las americas iii oficina 40 28230 parque e mpresarial las rozas / madrid - spain phone: +34-916-366458 d a ta m o d ul suisse gmbh stationsstr. 57 ch-8606 n?nikon - switzerland phone: +41-44-94091-50 d a ta m o d ul l td. / u k c ollins building 3 vigo place - aldridge - walsall w s9 8ug - united kingdom phone: +44-1922-457358 d a ta m o d ul inc. / u s a 275 m arcus blvd, unit k hauppauge, ny 11788 - usa phone: +1-631-951-0800 tft@data-modul.com | www.data-modul.com d i splay s and embedded solutions

▲Up To Search▲

Price & Availability of P270HVN010

	To Download P270HVN010 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .